ESS HOOKAH WIND COVER | LOTUS CAGE LARGE
We all love our Kalaud Lotus from time to time (HMD users especially) but we can all agree on one thing (if you can't, it's only a matter of time) once that rubber tab falls off, a piece breaks off, and here you are having to use tongs to remove the lotus, well that problem has been solved with the ESS Lotus Cage! Capable of resisting heat in the smoothest way possible (enough resistance you can grab it from the bottom with lit charcoal in it, and avoid burns (THE BOTTOM OF THE CAGE) and allows you to ash your coals by simply picking up and turning upside down. With the cage will you need assembly, here it is:
1. Remove kalaud and unscrew 3 screws from it.
2. Take the upper part of the kalauda and insert it on top of the Grid, it should sit on the grooves that are made inside the mesh.
3. Bare the bottom of the kalauda and insert the bottom of the grid. We take 3 screws and screw the bottom part with the top inside the grid.
4. Dress the top cover and you're free to fire!
NOTE: This product only works with the Kaloud Lotus, in addition to that, if you're running an old lotus you may need to get a new one for the fit as the screw holes were made for the newer models. Also for the sake of your hand, don't grab it from the middle.
PREMIUM WIND COVER
|Country of Manufacture||Russians Federation|
|Height||Approximately 13 inches|
|Diameter||Approximately 4 inches|